Skip to main content

Ikea Jerker Shrine: Standing Desk Conversion


This picture shows a Generation 1 Ikea Jerker desk converted to a standing configuration.

The Ikea Jerker is an older desk now, too deep for today's LCD monitors. It makes a great workspace and is crazy configurable.  I especially like the extension wings and the side mount platforms.

The extra large shelf holds the LCD monitor and the docked laptop.  Two smaller shelves hold other random items. The top one holds project boxes, the Siren of Shame and office supplies.  The bottom one , the UPS and software installation media and backups.


Labels:

Comments

Post a Comment

Popular posts from this blog

What's to eat at Merriweather Post Pavilion

Merriweather Post Pavillion is an outdoor music venue in Columbia Maryland. http://www.merriweathermusic.com/ Merriweather Post Pavillion has more food and refreshment options than a lot of venues we've been too. This sign shows the types of food and where they are located.  The next picture shows the other half of the billboard with a map to each of the locations.  I forgot to take picture of the lower right of the directory. Folks looking for beer, mixed drinks, frozen drinks and other alcoholic beverages will have to do their own scouting. Merriweather Post Pavilion Food and drink map.
Post a Comment
Read more

2014 Kawasaki Versys charging system failure

The Kawasaki Versys is a great motorcycle except for one weakness.  The Versys seems to burn out stators at an inordinate rate.  This results in not electrical generation capability and a dead battery.    They symptoms are that a battery is dead after riding but still takes a charge from a wall charger. The motorcycle ends up running off the battery draining the battery during every ride. A burnt out Stator often results in a weakened or dead voltage regulator.  The combined cost for OEM Kawasaki Stator and Voltage Regulator is about $500. You can see my 2014 Versys Stator that died in 2019 @ 14,500 miles on the odometer:
Post a Comment
Read more

Ikea Groland as a bathroom vanity with a vessel sink

We wanted to create a different sink and vanity feel when re-doing one of our bathrooms.  We picked the Ikea Groland kitchen island to be the base and a cultured stone bowl  as the sink. The Groland has an all wood frame and a butcher-block top.  It comes unfinished.  The top in the picture is the untreated color. The base in this picture has been stained with two coats of natural finish and 4 coats of polyurethane.  This gave it a bit of an amber tint that we were fine with. Groland's frame is 19x41.  The top is 21x47 with one inch overhang front and back and 3 inches overhang on each side.  We put the frame against the wall giving 2 inches overhang in the front as shown in the picture. We decided to put a granite or quartz top on the frame and save the wood top for a later project.  The granite overhangs 2" in the front and 2" on each side resulting in a 21x45 top. Groland comes in normal counter-top height which is too tall when usin...
2 comments
Read more